Research & Development

FOCUS OF RESEARCH & DEVELOPMENT ACTIVITIES​

  • Basic research in core engineering resulting in processes  and products
  • Providing software solutions to automate the administrative work leading towards paperless environment  which was appreciated by print media

Project List Under R&D

Sr. No.Project TitleGroup MemebersDescription
1Smart Dustbin & Waste SegregatorMarkar Khalid, Mohd. Saquib Siddiqui, Farooqui Muzzakkir, Mandal PranshuA smart dustbin is a simple tool that can be used as a solution to separate wet and dry waste.
2Pick & Drop Robotic ArmShaikh Azhar, Khan Bilal, Panchal Manthan, Shrivastav RishabhA robotic arm is a type of mechanical arm, usually programmable, with similar function to a human arm; the arm may be sum total of the mechanism or may be a part of a more complex robot.
3Automatic White Board CleanerJaiswal Deepak, Akumulla Lukmanhakim, Baiq Saqlain, Ansari Salman, Mulla SubhanWhen the switch is on, it moves across the full width of the board and its direction is reversed automatically in order to clean the white board.
4Tesla CoilTiwari Ritesh, Khokar Karansingh, Singh Mansi, Khan Uzma, Kanoujiya AkhaleshTesla is used in these circuits to conduct innovative experiments in electrical lighting, phosphorescence, X-ray-generation, high frequency alternating current phenomena, electrotherapy, and the transmission of electrical energy without wires.
5Human Safety Based PIR Sensor Project using ArduinoAnsari Inzimamul, Kadam Pooja, Haravde Mahesh, Chaurasia Amrendra, Rajbhar AjayA sensor which rectifies the human body in a particular region. While the sensor sense the temperature of human body or surrounding objects and differentiate temperature between them. In order to take signal we use arduino. Arduino will check that if the signal is in the range then it gives command to the relay (circuit breaker. i.e power supply). After getting command from arduino ,the relay will make “power supply turn off ” of machine (wood cutter) and it will stop.
6LED Cube using Arduino-Using different patterns and coding, a group of LED panel can be made to glow in order to enhance the environment in which the cube is placed. The cube can also be powered using mobile phone via OTG cable.

Grant received from organizations are mentioned below